Item # AZ-12, Zinc shot (Briteshot) on Finishing Associates, Inc.


All Categories > Abrasive Media and Deburring/Polishing Compounds. > Ceramic Media > Dry Process Centrifugal Barrel Finisher > Zinc-Base Shotblasting Abrasives Briteshot® > Item # AZ-12


	Item # AZ-12 Zinc shot (Briteshot)

Printable Page

Email This Page

Save To Favorites

larger image

Zinc shot (Briteshot)
BRITESHOT is zinc-base blasting abrasives developed in pursuit of the safety of shotblasting light-alloy works. Its explosion sensitivity is less than 1/10 of that of aluminum.

Specifications

Hardness (HV)		40-50

Specific Gravity		7.1

Bulk Density		4.2

Consumption Rate		Slightly lower

Deburring Effect		Slightly higher

Safety		High

Finish Tone		Normal

Abrasion on Machine		Low

Size		0.600 mm 0.710 mm 0.850 mm 1.180 mm 1.400 mm

Size distribution		>35% 10%min 85%min 95%min

Capability		Superior deburring capability The specific gravity of BRITESHOT is 2.5 times higher than aluminum. The superior performance of deburring by BRITESHOT is mainly due to its high specific gravity. Materializing a substantial cost cutdo

Finishing Associates Inc. • 1610 Republic Road • Huntingdon Valley, PA 19006
Phone (215) 953-1340 • Fax (215) 953-1342
E-mail:fasalesdesk@finishingassoc.com

©2004 Finishing Associates Inc. • All rights reserved.

Equipment

Item # AZ-12 Zinc shot (Briteshot)

Hardness (HV)

Specific Gravity

Bulk Density

Consumption Rate

Deburring Effect

Safety

Finish Tone

Abrasion on Machine

Size

Size distribution

Capability